Advertisement
2.3 MENU DESCRIPTION
2.3.1 STATIC MODE (STAT)
STAT
To access the static color mode press the MENU button until "STAT" appears on the
display.
Repeatedly press ENTER button to enter the sub-menu and choose the color and set the
values for the red, green, blue and white LEDs brightness using UP and DOWN buttons
(and eventually activate the strobe effect and set its speed: 0 = OFF, 01-20 = ON, with
increasing frequency).
Press UP/DOWN buttons to increase (or decrease) the current parameter value, then
press ENTER to switch to the next parameter.
After selecting the color, you don't have to exit the submenu. In this way the fixture will
keep these settings as its new default static scene and will continue displaying the last
edited value: even if turned off this will persist when powered on again after next reboot.
To exit the static color mode, simply press the MENU button once. This will take you back to the
main menu ("STAT" is displayed), where you can scroll through the various operating modes and
functions.
R.000
G.000
b.000
W.000
sT.00
12
(0-255)
(0-255)
(0-255)
(0-255)
(0-20)
Advertisement
