Safety - Husqvarna P 524X Operator's Manual

Hide thumbs Also See for P 524X:
Table of Contents

Advertisement

Available languages

Available languages

Note:
Other symbols/decals on the product refer to
certification requirements for some commercial areas.
Type plate
1
2
3
4
9
10
11
12
13
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
1902 - 003 - 09.02.2023
Always use the seat belt when
the ROPS is engaged.
Used if there is a risk of
Used if there is a risk of
1. Husqvarna Identity (HID) with article number, factory
and line, date, sequence number and control number
2. Model name
3. Product number code (PNC)
4. Scannable code
5. Manufacturer and manufacturer address
6. Production year
7. Rated power
8. Serial number with production date, year, week and
sequence number
9. Product number code (PNC)
10. Product weight, unladen
11. Maximum front axle weight (GAWR)
12. Maximum rear axle weight (GAWR)
13. Maximum laden weight (GCWR)
5
Euro V Emissions
6
7
WARNING:
8
voids the EU type-approval of this product.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
the product is incorrectly repaired.
the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
the product is not repaired at an approved service
center or by an approved authority.

Safety

General safety instructions
WARNING:
hands and feet and throw objects. Serious
injury or death may occur if you do not obey
the safety instructions.
WARNING:
product with damaged cutting equipment.
Damaged cutting equipment can throw
objects and cause serious injury or death.
Replace damaged blades immediately.
WARNING:
an electromagnetic field during operation.
This field may under some circumstances
interfere with active or passive medical
implants. To reduce the risk of serious or
Tampering with the engine
This product can cut off
Do not continue to use a
This product produces
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

P 524x efi

Table of Contents