Husqvarna P 524X Operator's Manual page 28

3. Remove the screws from the hinges.
4. Fold the engine cover rearward.
5. Install in opposite sequence.
To remove the front cover
1. Release the clip on the front cover with the tool
attached to the ignition key.
2. Remove the front cover.
To remove the cutting deck covers (R137)
1. Lower the cutting deck to position 1 (S).
2. Remove the 6 screws on the side covers of the
cutting deck.
3. Remove the side covers of the cutting deck
28
4. Install in opposite sequence.
To remove the right side cover
1. Remove the 4 screws and remove the side cover.
To remove the cover of the control box
1. Turn the 3 screws ¼ turn counterclockwise and
remove the cover.
To remove and install the right footrest plate
1. Remove the rearward drive pedal.
2. Remove the right side cover. Refer to
right side cover on page 28 .
3. Remove 2 screws and remove the cup holder.
To remove the
1902 - 003 - 09.02.2023