Turn on/off the wireless switch
When the CPU temperature is high, the computer may
not start up to prevent overheating of the CPU. Wait
until the computer cools down, and then turn the
power on again. If the computer does not power on
even after cooling down, contact Panasonic Technical
Support ( page 54).
Any changes from the default setting of the Setup
Utility must not be made until the "Setting up the
computer" procedure is completed.
During setup of Windows, use the stylus to move the
cursor and to click an item. ( page 22)
A Follow the on-screen instructions.
After turning on the computer, "Please wait while
windows sets up your computer ........." appears,
and then a small circle circulates on the screen.
This will take a few minutes.
Setup of Windows will take approximately 20 min-
utes. Go to the next step, conﬁrming each mes-
sage on the display.
You cannot choose the following words for user name
and password: CON, PRN, AUX, CLOCK$, NUL,
COM1 to COM9, LPT1 to LPT9.
You can change the user name, password, image and
security setting after setup of Windows.
Remember your password. If you forget the password,
you cannot use the Windows. Creating a password
reset disk beforehand is recommended.
The wallpaper for the ﬁrst logon user has already been
set on "3 Setup Windows." .
When using this computer under the sun, the screen
becomes easily viewable by changing the wallpaper to
the white wallpaper.