Setting up the computer
Be sure the Wireless switch (A) is ON before setting. The computer may not
be set properly if the switch is OFF.
Connect your computer to a power
The battery charging starts automatically. ( page
Do not disconnect the AC adaptor until the "Setting up
the computer" procedure is completed.
When using the computer for the ﬁrst time, do not
connect any peripheral device except the battery pack
and AC adaptor.
Handling the AC adaptor
Problems such as sudden voltage drops may arise dur-
ing periods of thunder and lightning. Since this could
adversely affect your computer, an uninterruptible
power source (UPS) is highly recommended unless
running from the battery pack alone.
Turn on the computer.
A Press the power switch (B).
The power indicator
Do not press the power switch repeatedly.
The computer will forcibly be turned off if you press
and hold the power switch for 4 seconds or longer.
Once you turn off the computer, wait for 10 seconds or
more before you turn on the computer again.
Do not perform the following operation until the ﬂash
memory drive indicator
Connecting or disconnecting the AC adaptor
Pressing the power switch
Touching the keyboard, touchscreen or external