Use these features to protect your data.
Another security measure
• Embedded Security (TPM) (
Setting the Supervisor Password/User Password
Set the Supervisor Password before setting the User Password.
Start up the Setup Utility (
Select [Set Supervisor Password] or [Set User Password], and press
Enter your password in [Create New Password] and press
When the password has been set, you need to enter your password in [Enter Current Password] and press
To disable the password, leave the input field empty and press
Enter your password again in [Confirm New Password] and press
For Numeric keyboard model, connect a USB keyboard and press
Do not forget your password. If you forget your Supervisor Password, you will not be able to use your computer. Con-
tact Panasonic Technical Support.
When running the Setup Utility, do not leave and go away from your computer even for a short time, since other people
may set or change the password.
The password will not be displayed on the screen.
You can use up to 32 alphanumeric characters (including spaces).
• The case (upper/lower) is ignored.
• Use only the upper horizontal row of numeric keys to input your password.
• You cannot use
Disabling the Supervisor Password also disables the User Password.
91): For further information, refer to the Installation Manual of "Trusted Platform
, and then select [Yes] and press
(Shift) and Ctrl to input a password.