Panasonic Toughbook CF-U1A1B1G2M Reference Manual page 99

Flash Memory Data Erase Utility
4
Press +
Fn B
At the confirmation message, select [Yes] and press
The computer will restart.
5
Press and hold
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
6
Set the Product Recovery DVD-ROM into the CD/DVD drive.
7
Select the [Exit] menu, then select your CD/DVD drive in [Boot Override].
8
Press (Enter).
The computer will restart.
If [Enter Password] is displayed during the following procedures, input the Supervisor Password or the User
Password.
9
Press 2 to execute [2. [Erase HDD]].
To cancel this operation, press 0.
10
At the confirmation message, press
11
When [<<< Start menu >>>] is displayed, press
The approximate time required for erasing data will be displayed.
12
Press
Space
At the confirmation message, press
The hard disk erase process starts. When the operation is completed, the [Hard disk data has been deleted] mes-
sage will appear. If a problem has occurred during the operation, an error message will appear.
To cancel partway, press Ctrl + C. The data erasure will be up to that point.
13
Remove the Product Recovery DVD-ROM, and then press any key to turn off the
computer.
(F10)
+ (F2) or +
Fn U Fn
.
(Enter).
(Enter).
(Del) while [Panasonic] boot screen is displayed.
.
Y
(Enter).
99