You can attach 2 batteries packs to this com-
puter. The battery indicators are prepared for
A : Battery 1 indicators
B : Battery 2 indicators
The battery pack is not inserted or not being charged.
• You can check presence of the battery pack by pressing Fn + F (
For Numeric keyboard model :
Charging is in progress.
The battery is fully-charged.
When you attach the battery cover with the battery pack already inserted:
• You can check the battery level by blinking times
Except for the operations stated above:
In high temperature mode, the battery pack is discharging the power to 80%
temperature mode (
Do not remove the battery pack since the power is not supplied even if you connect the
AC adaptor in this mode. If remove the battery pack, the computer will be turned off and
In high temperature mode, the 100% battery level is equivalent to 80% level of the normal
The remaining battery is approximately 9% or less.
95 % to 100 %
50 % to 94 %
25 % to 49 %
5 % to 24 %
0 % to 4 %