Adjustment Of Sensitivity - Rechner Sensors IAS Series Instruction Manual

Adjustment of sensitivity

Due to the sizes and designs of our units, the potentiometer is positioned in different places on adjustable
sensors (see Fig. 1 -6). Different potentiometers are also installed. We use 3 versions of potentiometers:
• Potentiometer 270 ° turn for sensors up to a design of M8
• Potentiometer 12-turn for sensors with a lateral seat on the sensor or up to a design of M12
• Potentiometer 20-turn for sensors with a size of M18 or larger
Fig. 1
Potentiometer screw
without cover
For sensors up to a size of M8, the
potentiometer can be rotated through 270°.
Fig. 4
Potentiometer screw
without cover
For sensors up to ≥ M18, the potentiometer is 20-turn.
Adjustment:
i
Turn clockwise
Turn anti-clockwise -
Fig. 2
For sensors up to a size of M12, the Potentiometer
with 12-turn
Fig. 5
To make adjustments to the
potentiometer, first remove the
sealing screw.
- to increase the sensitivity
to decrease the sensitivity
Potentiometer screw
without cover
Seal screw
To make the settings on the po-
tentiometer, first open the tab.
Fig. 3
Fig. 6
Tap
19