Rechner Sensors IAS Series Instruction Manual page 15

Mounting
Fig. 1
Fig. 2
≥ 3 x d
Free zone
Diameter "d"
Damping
e
material
Flush mountable Non-flush mountable
i
Damping material for IAS are all metals, for KAS all media.
The dimension "e" corresponds to the thread-free area or ≥ 25 mm.
Fig. 3 Fig. 4
a
b
Two opposing sensors must be mounted at least 2.2 times the switching distance apart
(distance "a").
i
In the case of non-flush mountable sensors, the thread-free zone must be mounted at
least 1.5 times the switching distance away from the damping material.
(distance "b").
15