Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DHP489
Summary of Contents for Makita DHP489
- Page 1 INSTRUCTION MANUAL Cordless Hammer Driver Drill DHP489 Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DHP489 Drilling capacities Masonry 16 mm Steel 13 mm Wood Auger bit: 38 mm Self-feed bit: 51 mm Hole saw: 51 mm Fastening capacities Wood screw 10 mm x 90 mm Machine screw No load speed (RPM) High (2) -
Page 3: Ec Declaration Of Conformity
Save all warnings and instruc- WARNING: Wear ear protection. tions for future reference. WARNING: The noise emission during actual The term "power tool" in the warnings refers to your use of the power tool can differ from the declared mains-operated (corded) power tool or battery-operated value(s) depending on the ways in which the (cordless) power tool. - Page 4 Remove any adjusting key or wrench before Maintain power tools and accessories. Check for turning the power tool on. A wrench or a key left misalignment or binding of moving parts, break- age of parts and any other condition that may attached to a rotating part of the power tool may affect the power tool’s operation.
- Page 5 MISUSE or failure to follow the safety disposal of battery. rules stated in this instruction manual may cause 12. Use the batteries only with the products serious personal injury. specified by Makita. Installing the batteries to non-compliant products may result in a fire, exces- sive heat, explosion, or leak of electrolyte. 5 ENGLISH...
-
Page 6: Functional Description
Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum battery life Charge the battery cartridge before completely discharged. -
Page 7: Overheat Protection
This tool is equipped with an electric brake. If the tool Overload protection consistently fails to quickly stop after the switch trigger is released, have the tool serviced at a Makita service This protection works when the tool/battery is operated center. -
Page 8: Speed Change
Lighting up the front lamp Speed change CAUTION: CAUTION: Do not look in the light or see the Always set the speed change lever source of light directly. fully to the correct position. If you operate the tool with the speed change lever positioned halfway between the "1"... -
Page 9: Adjusting The Fastening Torque
This tool has three action modes. Adjusting ring Drilling mode (rotation only) You can select the action mode and adjust the fastening torque with the adjusting ring. Hammer drilling mode (rota- tion with hammering) Selecting the action mode 1 - 21 Screwdriving mode (rotation with clutch) Select the mode suitable for your work. Turn the adjust- ing ring and align the mark that you select with the arrow on the tool body. -
Page 10: Installing Hook
Adjustable depth rod ASSEMBLY Optional accessory CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing or removing driver bit/ drill bit Optional accessory Fig.11 ► 1 . -
Page 11: Operation
Using hole OPERATION WARNING: Never use the hanging hole for CAUTION: When the speed comes down unintended purpose, for instance, tethering the extremely, reduce the load or stop the tool to tool at high location. Bearing stress in a heavily avoid the tool damage. -
Page 12: Maintenance
Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES Fig.17 ► 1 . Blow-out bulb... - Page 16 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885A00-221 www.makita.com 20220916...