Colorado time systems QuickStart Pro User Manual page 13

Single Lane
Timing:
Relay Exchange
Timing
nected to the QuickStart Pro at Touchpad 1 and the other at
Touchpad 2 (see page 5 for cabling this option).
At each valid touchpad input, the display shows the time elapsed
since the start input (cumulative split) in hundredths (M:SS.HH). If
the elapsed time is ten minutes or more, the display will alternate
between tenths (MM:SS.T) and hundredths (M:SS.HH).
In mode 10 (single lap timing), the display shows the first elapsed
time until a reset or new start input is detected.
In mode 11 (two lap timing with splits), running time continues in-
ternally while the display shows the cumulative split. The display
then resumes running time until a second touchpad input is detected,
indicating a second lap completed. This final time is displayed until
a reset or a new start input is detected.
In mode 12 (three lap timing with splits), running time continues in-
ternally while the display shows the cumulative split. The display
then resumes running time after displaying each cumulative split un-
til the third touchpad input. This final time is displayed until a reset
or a new start input is detected.
In mode 13 (four lap timing with splits), running time continues in-
ternally while the display shows the cumulative split. The display
then resumes running time after displaying each cumulative split un-
til the fourth touchpad input. This final time is displayed until a reset
or a new start input is detected.
In mode 14, running time continues internally while the display
shows the cumulative split. The display then resumes running time
after displaying each cumulative split until a single Reset input (also
know as "Finish Arm") is detected. The clock then stops timing after
the next touchpad hit. This final time is displayed until a reset or a
new start input is detected.
All Single Lane Timing Modes with multiple laps (or lengths, if
length timing is being done) have optional relay exchange timing ca-
pabilities at each touchpad hit before the final one.
The first touchpad hit (cumulative split) is recorded, disabling the
touchpad and starting a 2-second window. During the 2-second win-
dow, RJP input times continue to be recorded. After the 2-second
window expires, RJP input will be disabled and the cumulative split
will be displayed.
13