Spanset Wrappa Anchor Instructions page 3

PRODUCT LIFESPAN
It is mandatory by European Law that all PPE must be supplied
with comprehensive User Instructions which detail the lifespan
of the product, and the inspection requirements.
The actual frequency of the periodic inspection is the
responsibility of the competent person in charge of the
maintenance of the product. Aggressive or arduous conditions
and constant use will potentially reduce the working life of
the product and so a more frequent inspection regime will be
required to effectively monitor this.
SpanSet recommend that PPE for Work at Height is thoroughly
examined by a competent person:
- Periodically at intervals not exceeding 6 months
- Interim inspections where required
SpanSet recommend that Pre Use inspection is carried out by
the user before each and every use. Any concerns about the
condition of equipment must result in the item undergoing a
thorough interim inspection.
The equipment should only be used if it is found to be in a fi t
condition.
EQUIPMENT INSPECTION RECORD
TYPE OF EQUIPMENT: 'WRAPPA' ANCHOR
YEAR OF MANUFACTURE:
DATE FIRST PUT IN TO SERVICE:
Date Examined *Defects Found At Time Of Examination
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
*If there are no defects mark "in Good Condition"
/ /
WRAPPA ANCHOR
In addition SpanSet give this product a period of obsolescence
of 10 years from date of manufacture, even if never used.
Products should be withdrawn from service if they meet any
one of the following criteria:
1) Failure of a thorough examination
2) Subjected to or Used to arrest a fall
3) Manufacturers period of obsolescence (shelf-life) has been
reached Compatibility and use of PPE is the responsibility
of the user.
SPANSET TRAINING
SpanSet offers training either on site or at our own premises,
in all aspects of height safety. Courses are accredited under
our registration to ISO 9001, and certifi cates are issued on
successful completion.
Although it is not compulsory, for the safety of all users
SpanSet recommends you take advantage of this training
service, please contact us for further details.
SERIAL NO:
DATE OF PURCHASE:
NAME OF USER:
/ /
Signature Of Examiner