ZeeVee ZyPer User Manual page 60

Example
show device capabilities myEnc1 since 20
device(d8:80:39:9a:e6:d);
device.CapabilitiesVersion; values=1
device.streams-supported; values=video:video-scaled:analog-
audio:hdmi-downmix-audio
device.stream-mode-settable; values=video:video-scaled:analog-
audio:hdmi-downmix-audio
device.stream-mcast-settable; values=video:analog-audio:hdmi-
downmix-audio
device.join-video; values=multiview:genlocked:fast-switched
device.video-port; values=hdmi
device.hdmi-status; values=link:hdcp:resolution:fps
device.join-audio; values=analog:hdmi-downmix-audio
device.hdmi-audio-source; values=analog:hdmi:hdmi-downmix
device.analog-audio-source; values=none:analog:hdmi-downmix
device.encoder-analog-audio-source; values=none:hdmi-downmix
device.ir; values=device:server
device.rs232; values=device:server
device.video-wall; values=maxSize(5):bezelsSupported
device.send-multicasts; values=settable
device.ip-mode; values=dhcp:static
device.ip-params; values=address:mask:gateway
device.decoder-edid; values=save
device.encoder-edid; values=save:load
device.flash-leds; values=supported
device.ethernet-management-port-mode; values=supported
device.video-input-port; values=hdmi:display-port:auto
lastChangeIdMax(5072370);
Success
Related Commands
show device status
show device config
Commands
110
show device config
Displays device information for the specified device(s).
Syntax
show device config id select [since]
Parameters
id
Type: STRING or MAC Address
The identifier of the device. Either the full or portion of a string name or MAC
address can be supplied.
argument Description
all
Displays configuration information for all available
devices.
encoders
Only encoders are displayed.
decoders
Only decoders are displayed.
since
This parameter is optional and can be specified to display units based on
the number of changes, using the lastChangeId value on each device.
However, if used, a lastChangeId value must follow. Supply the since
argument before the providing the lastChangeId value.
argument Description
since
Required when using this parameter.
Advanced Operation
111