ZeeVee ZyPer User Manual page 59

set video-wall-encoder
Assigns the specified encoder to the desired video wall.
Syntax
set video-wall-encoder id wall
Parameters
id
Type: STRING or MAC Address
The name or MAC address of the encoder. String names are case-sensitive.
If none is passed as the argument, then the display is disconnected
from that position in the video wall.
wall
Type: STRING
The name of the video wall. String names are case-sensitive.
Example
set video-wall-encoder myEncoder myVideoWall
Success
Related Commands
create video-wall
set video-wall
set video-wall-decoder
show video-walls
Advanced Operation
108
show device capabilities
Displays device capabilities for the specified device(s).
Syntax
show device capabilities id select [since]
Parameters
id
Type: STRING or MAC Address
The identifier of the device. Either the full or portion of a string name or MAC
address can be supplied.
select
Type: STRING
Supply one of the following arguments.
argument Description
all
Displays configuration information for all available
devices.
encoders
Only encoders are displayed.
decoders
Only decoders are displayed.
since
This parameter is optional and can be specified to display units based on
the number of changes, using the lastChangeId value on each device.
However, if used, a lastChangeId value must follow. Supply the since
argument before the providing the lastChangeId value.
argument Description
since
Required when using this parameter.
Commands
109