Displaying Devices By Status; Displaying Devices By Name - ZeeVee ZyPer User Manual

Displaying Devices By Status

Both the Sources and Displays window contain a Filter by status option. There are
check boxes to filter by Status (Green, Yellow, Red), Device Type (4K or HD), USB
(Present, Not present) There is also an option to filter Sources or Displays by name.
1. Click the Filter Icon.
2. Only those devices with the selected status will be displayed. As illustrated in this
example, only ZyPer4K devices are shown in the Sources window. ZyPerHD source
are filtered out.
3. Select every box from the Filter to show all devices.
Basic Operation
16

Displaying Devices By Name

Both the Sources and Displays windows contain a Filter by name field. Use this field to
enter the name of the desired device(s) to be displayed.
As text is entered, the interface automatically begins a search of the current string for each
recognized device. Devices that are displayed must contain the text (in sequence) that is
currently in the Filter by name field. Text searches are case-sensitive.
1. Click in the Filter by name field.
This example uses the following named sources. For more information on naming
sources see Configuring Encoders and Decoders (page 20).
2. Type the desired sequence of characters in the Filter by name field to search. In this
example, we want to only display the "Wildlife" source devices. To do this, we can en-
ter part of the name, such as "Wild" or even "W" (since no other device name contains
the character "W"). All text entries are case-sensitive.
Basic Operation
17