ZeeVee ZyPer User Manual page 17

13. Use the Baudrate section of Config to configure the RS232 settings for the control
device, such as an automation control system. Click the Baudrate drop-down list to
select the desired baud rate of the control device.
The Device IP settings can also be assigned using the set device ip dhcp and
set device ip static commands. When assigning RS232 settings from the
command line, use the set device rs232 command. See
(page 54) for more information.
Basic Operation
API Command Listing
24
Encoder and Decoder Status Information
You can obtain status information about an encoder and its source at any time, from the
Source Config page.
1. Login to the Maestro Z. Refer to Accessing Maestro Z (page 12)
information.
Left-click the desired source and select the Status option from the context menu.
2.
Basic Operation
for more
25