Server Functions Page; Server Information; Setting The Edid Mode - ZeeVee ZyPer User Manual

Server Functions Page

The majority of this page is used to display general information about the Management
Platform. In addition, this page provides controls for setting the EDID mode and rebooting
or restarting the server. Server firmware can also be updated from this window.

Server Information

This section provides information about the Management Platform, such as the host name,
IP address, MAC address, version, serial number, uptime duration, and free memory.
1. Login to the Maestro Z. Refer to Accessing Maestro Z (page 12)
tion.
2. Click the Server option at the left of the page.
3. Information about the Management Platform will be displayed in the Server pane.
Basic Operation
for more informa-
40

Setting the EDID Mode

By default, Auto EDID mode is enabled. This means that the Management Platform will
compare the encoder EDID with the decoder EDID. If they are different, then the EDID
from the decoder (sink) will be used by the encoder (source). Setting the EDID Mode
affects all join modes: fast-switched, genlocked, and video-wall. Refer to the
command in the API Command Listing (page 54)
1. Login to the Maestro Z. Refer to Accessing Maestro Z (page 12)
tion.
2. Click the Server tab at the left of the page.
3. EDID information will appear in the Server window under the Status information. You
may need to scroll down in the window to see the EDID information.
Basic Operation
join
section for more information.
for more informa-
41