Objectives - Leica MacroFluo User Manual

Table of Contents

Advertisement

2.7 Objectives

– We recommend using the 1×, 2×, 0.8×, 0.5×
planapochromatic objectives, in order to take
advantage of the high performance of the
apochromatic zoom system.
– Use the objectives directly on the diaphragm ring
of the zoom system or with fine focusing.
Remove the diaphragm ring if the fine focusing is
used (see below).
– A planapochromatic 5× HR objective is available
for magnifications in the microrange (see assem-
bly diagram p. 10). Always use the HR objective
with fine focusing.
– The Leica M series 0.63×, 0.5×, 0.32× achromatic
objectives, which can be attached to the
diaphragm ring of the zoom system or the fine
focusing using an adapter (see assembly dia-
gram on p. 10), can also be used.
Diaphragm ring
At the bottom of the zoom system is a diaphragm
ring (4.4). The diaphragm ring must be removed if
fine focusing is used.
Objective ➜ zoom system
Fasten planapochromatic objective (4.3) counter-
clockwise on the diaphragm ring of the zoom
system (4.4).
Or:
Fasten achromates to the diaphragm ring of the
zoom system (4.4) by means of the adapter.
Objective ➜ fine focusing ➜ zoom system
Loosen 3 hexagon-head screws (4.6) at
diaphragm ring (4.4) and remove diaphragm ring.
Tighten the fine focusing (4.5) with 3 hexagon-
head screws (4.7) to the zoom system (4.2).
Fasten planapochromatic objective (4.3) counter-
clockwise on the fine focusing (4.5).
14
Or:
Fasten achromates to the fin focusing (4.5) by
means of the adapter.
6
3
Fig. 4
the diaphragm ring of the zoom system.
Z16 APO on the right: Objective mounted on the
fine focusing (diaphragm ring removed).
1 Z6 APO with zoom 6:1
2 Z16 APO with zoom 16:1
3 Objective
4 Diaphragm ring
5 Fine focusing
6 3 hexagon-head screws for fastening the
diaphragm ring to the zoom system (the figure
does not show all 3 hexagon-head screws)
7 3 hexagon-head screws for fastening the fine
focusing to the zoom system (the figure does
not show all 3 hexagon-head screws)
Leica MacroFluo – Assembly
1
4
Z6 APO on the left: Mount the objective on
2
7
5
3

Advertisement

Table of Contents
loading

Table of Contents