Electrolux EOK8C2X0 User Manual page 43

6.2 Initial preheating
Preheat the empty oven before the first use.
Step 1 Remove all accessories and removable shelf supports from the oven.
Step 2
Set the maximum temperature for the function:
Let the oven operate for 1 h.
Step 3
Set the maximum temperature for the function:
Let the oven operate for 15 min.
The oven can emit an odour and smoke during preheating. Make sure that the room is ventilated.
6.3 Wireless connection
To connect the appliance you need:
• Wireless network with the Internet connection.
• Mobile device connected to the same wireless network.
Step 1 To download My Electrolux Kitchen app: Scan the QR code on the rating plate with the camera on
your mobile device to be redirected to Electrolux Homepage. The rating plate is on the front frame
of the appliance cavity. You can also download the app directly from the app store.
Step 2 Follow the app onboarding instructions.
Step 3
Turn the knob for the heating functions to select:
Step 4 Turn the control knob to select: Settings. Turn on Wi-Fi. Refer to "Menu Structure" chapter.
Frequency
Protocol
Max Power
Wi-Fi module
6.4 Software licences
The software in this product contains
components that are based on free and open
source software. Electrolux acknowledges the
contributions of the open software and
robotics communities to the development
project.
To access the source code of these free and
open source software components whose
2.4 GHz WLAN
2400 - 2483.5 MHz
IEEE 802.11b DSSS, 802.11g/n OFDM
EIRP < 20 dBm (100 mW)
NIUS-50
license conditions require publishing, and to
see their full copyright information and
applicable license terms, visit: http://
electrolux.opensoftwarerepository.com (folder
NIUS).
.
.
.
ENGLISH 43