Kodak alaris IMAGELINK 2400DV Plus Installation Manual page 3

Unpacking and Setting Up
1. Remove the plastic bag from the machine and remove all accessories in
the packing material.

Operator's Manual (1).

3 x 8 mm screws for RFC Option I/F Board (5)

Power Cord (1)

Printer Cable (1)

Prism Unit (1)
2. Remove the foam packing and several pieces of tape holding the machine
housing into position.
3. Remove the 2 screws from the front of the machine. Retain the screws as
they will be needed later in this procedure.