Electrical Requirements - iLiving ILG8SF16V-ST Owner's Manual

PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE
ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE, OR MAINTAIN THE PRODUCT
DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY
INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN
PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR
FUTURE REFERENCE.
BEFORE YOU BEGIN
WARNING
Installation, trouble shooting, and replacement of parts are to be performed
only by authorized service technicians.

Electrical Requirements:

• The motor amperage and voltage ratings must be checked for
compatibility to supply voltage prior to final electrical connection. Please
refer to the motor's nameplate label.
• Wiring must conform to local, state, and national codes.
Tools / Materials Needed:(Not Included)
• Mounting Fasteners (8)
• Sealant or Caulk
• Regular Screwdriver Set
UNPACKING
Contents:
• Shutter Mounted Exhaust Fan
• Fan control (ILG8SFST)
• Owner's Manual
Inspect:
• After unpacking fan, carefully inspect for any damage that may have
occurred during transit. Check for loose, missing, or damaged parts.
• Check all bolts, screws, set-screws, etc. for looseness that may have
occurred during transit. Tighten as needed. Rotate propeller by hand to
ensure it turns freely.
• See General Safety Instructions on page 3, and Cautions and Warnings
as shown.
2