Epson SureColor F6470H User Manual page 77

SC-F6400 Series/SC-F6400H Series
Item
Maintenance Setting
Cleaning Setting
Threshold of Clog-
ged Nozzles
Max Retry Cleaning
Count
Periodic Cleaning
On
Execution Timing
Print Duration
Print Page
Print Length
Cleaning Level
*
Off
Actions Beyond
Threshold of Missing
Nozzles
Maintenance Cleaning
User's Guide
Control Panel Menu
Parameter Explanation
*
The printer monitors the condition of the print head nozzles before
1 to 10 (1 )
printing starts, so set the operation for when clogged nozzles (missing
nozzles) are detected during monitoring.
*
0
When the number of clogged nozzles that are detected exceeds the
number set in Threshold of Clogged Nozzles, Head Cleaning is
1
executed as part of maintenance.
Max Retry Cleaning Count sets the number of times maintenance can
2
be retried if the clogged nozzles are not cleared after maintenance is
done.
When On is set, cleaning is done at the interval set for one of Print
Duration, Print Counter, or Print Length from Execution Timing. At
this time, cleaning is performed at the level set in Cleaning Level.
1 to 9999 minutes
1 to 9999 pages
1 to 9999 m (100
*
m )
(3.28 to 32805.12 ft
*
[328.08 ft ])
Light*
Heavy
Stop Printing Sets the action when the number of clogged nozzles that are detected
exceeds the number set in Threshold of Clogged Nozzles.
*
Show Alert
When Stop Printing is set, the message Auto Nozzle Maintenance
found that the allowable number of clogged nozzles has been
Auto Cleaning
exceeded. The print quality may decline. is displayed on the control
panel screen, printing is stopped, and the printer enters standby status.
When Show Alert is set, printing continues without stopping while the
message remains displayed.
When Auto Cleaning is set, Head Cleaning is performed at the time set
in Maintenance Schedule.
* When On is set, Head Cleaning is performed automatically when the
On
printer is not used for a specified period. This cleaning ejects
sedimented ink in the ink tubes to prevent print quality from falling.
Off
77