Table of Contents
Advertisement
SC-F6400 Series/SC-F6400H Series
F
Lock levers
Release the lock to adjust the position of the roll core holder. These locks are on the left and right roll core
holders.
G
Auto switch
Use this switch to select the auto take-up direction. When this is set to Off, winding is not performed.
H
Manual switch
Use this switch for manual take up. This is available when the Auto switch is set to Off.
I
Lock switch
To pull out an ink supply unit tray, unlock it by moving the lock switch to the right. After placing the ink supply
unit tray in the ink unit, lock it by moving the lock switch to the left.
The SC-F6400H Series also has a lock switch on the left side.
J
Ink supply unit tray
Insert the ink supply unit for the color indicated on the label. Insert all of the ink supply unit trays.
The SC-F6400H Series also has an ink supply unit tray on the left side.
K
Option port
Connect the cable for the auto take-up reel unit. Be sure to use the cable supplied.
L
USB port
Connects the USB cable.
M
Data lamp
The data lamp lights or flashes to indicate the network connection status and whether the printer is receiving
data.
On
: Connected.
Flashing
: Receiving data.
N
LAN port
Connects the LAN cable.
O
Status lamp
The color indicates the network's communication speed.
Red
: 100Base-TX
Green
: 1000Base-T
User's Guide
Introduction
10
Advertisement
Table of Contents
