Table of Contents
Advertisement
SC-F6400 Series/SC-F6400H Series
See the following table for more details on
Margin Position
*1, *4, *5
A
Trailing edge
*1, *6
B
Leading edge
C
*2, *3
Right edge
*2, *3
D
Left edge
*1, *4,
E
Between pages
*5
*1
The set margin and the actual print results may differ depending on the RIP being used. Contact the RIP
manufacturer for more information.
*2
This may be available in the RIP depending on the RIP software being used. Contact the RIP manufacturer
for more information.
*3
If the total of the print data width and set left and right margins exceeds the printable area, a portion of the
data will not be printed.
*4
Automatic cutting may be available in the RIP depending on the RIP software being used. Contact the RIP
manufacturer for more information. If the RIP does not have an automatic cutting setting, the printer's Auto
Cut setting is applied.
*5
When using the auto take-up reel unit (and the Auto switch is set to Forward/Backward), automatic cutting is
not performed while printing.
*6
The minimum top margin varies depending on the Pass Mode as shown in the following table.
SC-F6400 Series
Pass Mode
300x600dpi -1.1pass draft
300x600dpi -1.1pass
300x600dpi -1.5pass
300x600dpi -2.3pass
600x600dpi -2.1pass
600x600dpi -3.0pass
600x600dpi -4.0pass
User's Guide
Basic Operations
A
to E.
Explanation
The value set in Bottom Margin from the printer's Printer Setup menu.
Applied before automatic cutting after printing.
The value set in Top Margin from the printer's Printer Setup menu.
Applied before printing after loading media or cutting.
The value set in Right Margin from the printer's Printer Setup menu.
The value set in Left Margin from the printer's Printer Setup menu.
The value set in Margin Between Pages from the printer's Printer Setup
menu. Applied when printing continues without automatic cutting after
printing (half of the value set for after printing and half for before
printing).
Minimum Top Margin
8mm (0.31in.)
8mm (0.31in.)
16mm (0.63in.)
24mm (0.94in.)
5mm (0.2in.)
5mm (0.2in.)
5mm (0.2in.)
49
Available Setting
Range
5 to 150 mm
(0.20 to 5.91 in.)
5 to 35 mm
(0.20 to 1.38 in.)
3 to 25 mm
(0.12 to 0.98 in.)
3 to 25 mm
(0.12 to 0.98 in.)
5 to 999 mm
(0.20 to 39.33 in.)
Advertisement
Table of Contents
