Epson SureColor F6470H User Manual page 75

SC-F6400 Series/SC-F6400H Series
Item
Nozzle Check between Pages
On
Execution Timing
Print Length
Print Page
Print Duration
*
Off
Information Printing
Media Remaining
Information
Print Information
User's Guide
Control Panel Menu
Parameter Explanation
When On is set, a nozzle check pattern is printed periodically at the
specified timing. When printing is complete, you can visually inspect
the check pattern to determine whether there are any stripes or
unevenness in the preceding or following printout.
*
1 to 9999 m (99 m )
Select one of Print Length, Pages, or Print Duration to set the timing
(3.28 to 32805.12 ft
for printing the check pattern.
*
[324.80 ft ])
1 to 9999 pages
1 to 9999 minutes
On Prints information, such as the remaining amount of media, when
media is removed or replaced.
*
Off
When Media Remaining Information is set to On, the remaining
amount is printed on the unused side of the cut position. The following
On
information is printed. To print the media remaining information, set
Remaining Amount Management in Media Settings to On.
*
Off
❏
❏
❏
❏
❏
❏
❏
When Print Information is set to On, the following information is
printed on the printed side of the cut position.
❏
❏
❏
❏
❏
❏
❏
❏
Model: Model name of the printer
Serial No.: Serial number of the printer
Print Date: Date and time of printing
Bank No.: Media number when printing
Media Type: Media Type registered to the media number when
printing
Media Width: Automatically detected value of media width
Remaining Amount: Remaining amount of media
Model: Model name of the printer
Serial No.: Serial number of the printer
F/W Version: Firmware version of the printer
Print Date: Date and time of printing
Bank No.: Media setting number when printing
Media Type: Media Type registered to the media setting number
when printing
Media Width: Automatically detected value of media width
Print Length: Amount of media used
75