Configure Idrac - Axis Camera Station S12 Series User Manual

AXIS Camera Station S1296 Rack Recording Server
Manage your device

Configure iDRAC

The Integrated Dell Remote Access Controller 9 (iDRAC9) with Lifecycle Controller is designed to make system administrators more
productive and improve the overall availability of Dell systems. iDRAC alerts administrators to system issues, help them perform
remote system management and reduces the need for physical access to the system. You must configure the initial network settings
based on your network infrastructure to enable the communication to and from iDRAC.
1. Press F10 during Power-on Self-test (POST).
Note
The Lifecycle Controller Initial Setup Wizard will be displayed only for the first time. Use the Initial Setup Wizard to select the
language and keyboard, configure network settings, iDRAC network settings, credential configuration, and view the summary
of the settings. To make configuration changes later, select Settings from the Lifecycle Controller home page.
2. Configure the language and keyboard, and click Next.
3. Check the product overview and click Next.
4. Configure Lifecycle Controller network settings:
4.1 From the NIC Card drop-down list, select the NIC port to configure.
4.2 From the IPV4 Network Settings > IP Address Source drop-down list, select one of the following options:
- DHCP: indicates that the NIC must be configured by using an IP address from a DHCP server. DHCP is the default
option and the DHCP IP address is displayed on the Network Settings page.
- Static IP : indicates that the NIC must be configured by using a static IP. Type the IP address properties including
IP Address, Subnet Mask, Default Gateway, and DNS Address. If you do not have this information, contact your
network administrator.
- No Configuration: indicates that the NIC must not be configured.
4.4 If VLAN is used, click Enabled and type the VLAN ID and Priority under Lifecycle Controller VLAN Settings to
configure the VLAN settings of a NIC.
4.5 Click Next. If Lifecycle Controller settings are not correctly configured, an error message is displayed.
5. Configure iDRAC network and credentials:
5.1 Go to IPV4 Configuration > IP Address Source and select one of the following options:
- Static: indicates that the network must be configured by using a static IP. Type the IP address properties
including IP Address, Subnet Mask, Default Gateway, DNS Address Source and DNS Address. If you do not
have this information, contact your network administrator.
- DHCP: indicates that the NIC must be configured by using an IP address from a DHCP server. DHCP is the default
option and the DHCP IP address is displayed on the Network Settings page.
5.3 Under Credentials, enter Account Username and Password to access iDRAC network.
5.4 Click Next.
6. Verify the summary of the Lifecycle Controller and iDRAC network configuration and click Finish.
29