Ordinary Maintenance - Bonnet Neve OFFLIP HOT User Instructions

KNOB AND SWITCH INSTRUCTIONS:
Temperature Controller top shelf: Turn the knob to adjust the heat for the top shelf in
this row. The maximum adjustment is limited to "max".
Temperature Controller second shelf: Turn the knob to adjust the heat for the second
shelf in this row. The maximum adjustment is limited to "max".
Temperature Controller third shelf: Turn the knob to adjust the heat for the third shelf
in this row. The maximum adjustment is limited to "max".
Temperature Controller fourth shelf: Turn the knob to adjust the heat for the fourth
shelf in this row. The maximum adjustment is limited to "max".
Temperature Controller base tray: Turn the knob to adjust the heat for the base tray
in this row. The maximum adjustment is limited to "max".
ON/OFF-Switch: Toggle to switch the unit and the lights on or off
ON/OFF-Switch: Toggle to switch the fan motor on or off
Temperature Controller hot air ventilation: Turn the knob to adjust the heat for hot
air ventilation. The maximum adjustment is limited to "max".
9. PRESCRIPTIONS AND RESTRICTIONS
Keeping pharmaceutical products in the display case is strictly forbidden (fig.12).
Do not remove protections or panels when it requires the use of tools. IN PARTICULAR, DO NOT REMOVE
THE ELECTRIC CONTROL BOARD COVER AND THE SCREWS FASTENING SHELF LIGHTING PLUGS.
Do not expose the display case to atmospheric agents (fig. 16). DO NOT STEP on the cabinet bumper
rail.
DO NOT STEP on the top of the cabinet and DO NOT LAY WEIGHTS on it (fig. 11).
Do not spill water directly or indirectly on the display case (fig. 15). Do not touch the equipment with
damp or wet hands or feet; do not use it while barefoot (fig. 14).
Do not use inflammable detergent cleaners. Never use high-pressure, water pressure or steam jet-
cleaning machines. You will find further information in the chapter concerning cleaning.
Wear fire safe, insulated gloves to prevent burnings when touching hot parts.
ANY OTHER USE NOT EXPRESSLY MENTIONED IN THIS BOOKLET MUST BE CONSIDERED AS
HAZARDOUS. THE MANUFACTURER ASSUMES NO RESPONSIBILITY FOR ANY DAMAGE RESULTING
FROM IMPROPER, INCORRECT OR UNREASONABLE USE.

10. ORDINARY MAINTENANCE

ATTENTION! BEFORE STARTING ANY MAINTENANCE OR CLEANING, DISCONNECT THE EQUIP-
MENT FROM THE ELECTRICAL POWER SUPPLY USING THE MAIN WALL CUT- OFF SWITCH
(fig.17).
IMPORTANT: During maintenance or cleaning operations, be sure that the light in the working area is
sufficient and/ if necessary, use an additional source of light.
IA0010125.B
11