Table of Contents
Advertisement
1. DESCRIPTION
The hot display case is meant for hot food. Its main features and dimensions are clearly illustrated in
drawings 1, 2 on page 4. As for its weights, crating included and excluded, see table I on page 5. A
wide variety of optional accessories enabling enhanced functions is also available. To this respect,
contact the authorised after-sales service only.
2. TRANSPORTATION
The display cabinet is contained in a specially crated package that enables transportation by the use of
fork-lift trucks. Handle the machine on its own pallet or on a similar platform; use a forklift, either
manual or electric, provided it is adequate for handling such appliances and it has the requisite lifting
capacity (see page 5 - fig. 4 and table I). Handling is reserved to the authorised after-sales service.
3. DELIVERY AND STORAGE
Prior to accepting the case from the carrier, check the conditions of the package. If it is showing visible
damage, the machine too may have been impaired. In this case, unpack the machine in the presence of
the carrier and sign, though with reservation, the delivery bill. The manufacturer assumes no liability
for damage caused by transportation or wrong handling during storage. Unpacking is reserved for the
authorised after-sales service. Storing temperature must be between -25°C and +55°C, air humidity
between 30% and 95%. Keep the cabinet safe from direct sunlight and from the elements.
4. INSTALLATION AND AMBIENT CONDITIONS
The display case must not be installed in premises containing explosive gas substances. It can neither
be used in the open nor exposed to the rain.
Before connecting the case make sure that its rating plate data correspond to the features of the existing
electrical installation (see page 6 - fig. 8 and tab. III). For correct operation, the machine must be
placed on a level floor (see page 5 - fig 5), far from sources of heat and/or direct sunlight, doors,
windows, fans or ventilation outlets (see page 5 - fig.7). It must also be granted a reasonable free front
area for customer service.
The display case must be housed in a room conforming to the ambient requirements mentioned
in page 5 - fig. 6 and tab. II.
IMPORTANT: placing fixed panels on the top of the cabinet is advised against, as this part must
be accessible for servicing purposes.
5. ELECTRICAL CONNECTION
IMPORTANT: ahead of the case there must be a MULTIPOLAR CUT-OFF SWITCH WITH CONTACTS
SPACING AT LEAST 3 SQ.MM. AND WITH THE ADEQUATE CIRCUIT-BREAKING POWER. (see fig. 20).
The position of the cut-out switch must enable its actuation in any emergency situation (maximum
distance 3 m). Show the position of the cut-out switch to any prospective operator.
The HOT CASE CABINET must be installed by professionally qualified personnel, in accordance with the
instructions provided by the manufacturer and local regulations. Incorrect installation may cause harm
to persons, animals and property. The manufacturer assumes no responsibility for such damage.
Make sure that the system power supply voltage corresponds to the values appearing on the rating plate
IA0010125.B
9
Advertisement
Table of Contents
