Table of Contents
Advertisement
• The wall main switch may be off.
If power failure is not due to any of the above causes, call the nearest after-sales service
immediately, empty the display case and store the foods in surfaces that may ensure preservation
temperature.
2) The display case will not heat properly:
• Make sure that the product load is correct.
• Check and clean it before starting normal operation (see chapter 10).
• Check that the display case is perfectly horizontal by the use of a spirit level. Make certain that
ambient conditions comply with the requirements of page 5.
Should insufficient heating persist, resort to the nearest after-sales service.
3) The cabinet operates noisily:
• Make sure that screws and bolts are closed tight.
• Check that the display case is perfectly horizontal by the use of a spirit level.
IN CASE OF ELECTRIC LEAK OR FIRE, do not breathe inside the room that houses the display case
before having aired it properly. Turn the display case off by the main switch ahead (see fig. 17).
DO NOT USE WATER BUT ONLY DRY EXTINGUISHERS TO FIGHT THE FIRE.
12. AFTER-SALES SERVICE
Should it be necessary to resort to technical assistance, contact your salesperson immediately. If spare
parts are needed, always refer to your after-sales service: insist on the use of original spare parts.
Contact your nearest after sales service.
13. DISMANTLING AND DISPOSAL
For the sake of the environment, please sort the parts and materials composing the display case in
accordance with the waste disposal provisions in force in your country, so that they can be properly
disposed of or recycled. All its parts cannot be treated as household waste, except for the metal parts,
which nevertheless are not considered as special waste in most European countries.
THE PARTS COMPOSING THE HEATING CIRCUIT MUST NOT BE SEVERED OR SEPARATED BUT
DELIVERED INTACT TO A CENTRE SPECIALISED IN RECYCLING ELECTRIC COMPONENTs.
IA0010125.B
13
Advertisement
Table of Contents
