Outside Vertical Installations - HAMPTON BAY Greenfire GC60-2 Technical Manual

o v i
utSide ertical nStallationS
To accomplish an outside vertical pipe installation, follow the "h
section and then finish it by performing the following (refer to Figure 15).
1. Install a tee with clean out on the outside of the house.
2. Install PL vent upward from the tee. Make sure that you install support brackets to keep the vent
straight and secure. All joints in the exhaust venting system must be fastened with at least three (3)
screws.
3. Install ceiling thimble and secure the flashing as you go through the roof.
4. Ensure that the rain cap is a minimum of 24" (61 cm) above the roof.
Hampton GC60-2 Cast Pellet Stove Technical Manual
Installation
:
Rain Cap
MIN 24"
(610mm)
3"MIN Clearance
(75mm)
All around
Wall Strap
Horizontal
Frame for
Thimble
3"(76mm) MIN.
Figure 15: Outside Vertical Installation.
e t
OrizOntAl xhAust hrOugh
Storm Collar
Flashing
4' (1220mm) MAX
Clean Out Tee
Wall Thimble
W i "
All nstAllAtiOns
17