Specifications - Kohler GM87448 Operation

2.3 Specifications

AC Input
Frequency Input
DC Output
Fuse Protection
Battery Types
Monitoring
LED Indications
Environmental
Operating
Storage
Relative Humidity
Salt Spray Testing
Corrosion Resistant
Enclosure
Environmental Resistant
Battery Connections
Lead Length
Battery Connections
AC Power Connections
Lead Length
Storage
Available Options

Temperature compensation

Dual-charger harness adapter
(Allows for an additional charger to be added to the system, up to the system limit*. When outputs are in parallel, provides
redundancy† and higher output† on a 12V and 24V battery bank. Provides battery balancing when connected in series on a
series connected 24V battery bank. Recommended when there are 12V loads connected to series-connected 24V battery bank).
* Only two chargers are supported on the APM402 and Decision-Maker
chargers.
† Dependent on the setting for each charger. See the section on SiteTech™ Settings for detail on parameters and configuration.
Figure 1 Specifications
TP-7077 3/19
100–260 VAC
50/60 Hz
10 Amps @ 12 VDC or
10 Amps @ 24 VDC
(On battery voltage regulation ±1%; current is electronically limited)
15 amps ATC
Flooded Lead Acid (FLA)
AGM
Gel Cell
High Performance AGM
Nickel-Cadmium (Ni-Cad)
Power
Communication
Temperature compensation
Output charger curve and charger status

Red

Green
–20°C to 70°C (–4°F to 158°F)
–40°C to 85°C (–40°F to 185°F)
5 to 95% (non-condensing)
ASTM B117
From battery gases
From rain, snow, dust, and dripping water
1.8 m (6 ft.) red and black leads
9.5 mm (3/8 in.) ring terminals
1.8 m (6 ft.)
Standard US style 3-prong AC plug
3000, 550, 6000. The Decision-Maker
®
®
3500 supports four
11