Adjusting The Shock Absorber Assembly - Yamaha XSR700M 2021 Owner's Manual

Instrument and control functions
Adjusting the shock absorber
assembly
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
NOTICE
4
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Adjust the spring preload as follows.
Turn the adjusting ring in direction (a)
to increase the spring preload.
Turn the adjusting ring in direction (b)
to decrease the spring preload.
 Align the appropriate notch in the
adjusting ring with the position in-
dicator on the shock absorber.
 Use the special wrench and ex-
tension bar included in the tool kit
to make the adjustment.
EAU47003
1
ECA10102
3
1. Extension bar
2. Special wrench
3. Spring preload adjusting ring
4. Position indicator
Spring preload setting:
Minimum (soft):
1
Standard:
3
Maximum (hard):
9
WARNING
This shock absorber assembly con-
tains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.
4-17
 Do not tamper with or attempt
1
2
3
4
5
6
7
8
9
 Do not subject the shock ab-
2
4
(b)
 Do not deform or damage the
(a)
 Do not dispose of a damaged or
EWA10222
to open the cylinder assembly.
sorber assembly to an open
flame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.
cylinder in any way. Cylinder
damage will result in poor
damping performance.
worn-out shock absorber as-
sembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.