Table of Contents
Advertisement
SYS-405 User Manual
Item/Submenu
IO60
I/O Address
IRQ
GPS
I/O Address
IRQ
Watch Dog Timer
Watch Dog Timer
Timer Unit
Timer Value
5.3.2
Hardware Monitor Items and Submenus
Item/Submenu
CPU Temp
CPU Fan
VCORE
3.3 V
5.0V
12.0V
1.35V
5.3.3
APM Configuration Items and Submenus
Item/Submenu
Power On By RTC Alarm
Wake on Lan1
2014-07-21
SIO CONFIGURATION ITEMS & SUBMENUS
Default
Setting
High=33.333 MHz
Normal=1.8432MHz
[ 3E8]
Modifies the input serial 3 I/O address range from 0x100 to 0xFFF8
[ 6]
Modifies the input serial 3 IRQ range from 1 to 15
[ 2E8]
Modifies the input serial 4 I/O address range from 0x100 to 0xFFF8
[ 7]
Modifies the input serial 4 IRQ range from 1 to 15
[Disable/Enable]
Enables or disables the watch dog timer
[Second/Minute]
If Watch Dog Timer is Enabled, choose between Second and Minute
Set Watch Dog Timer values (for both Second and Minute) between 20
255
and 255
HARDWARE MONITOR ITEMS & SUBMENUS (Read Only)
Default
Setting
N/A
Displays the temperature of the CPU in Celsius
N/A]
N/A if no external fan is connected
N/A
Displays the voltage for this selection
N/A
Displays the voltage for this selection
N/A
Displays the voltage for this selection
N/A
Displays the voltage for this selection
N/A
Displays the voltage for this selection
APM CONFIGURATION ITEMS & SUBMENUS
Default
Setting
[Disable]
If enabled, allows the SYS-405 to be powered on by an RTC alarm.
[Enable]
If enabled, allows the SYS-405 to be wakened by the Ethernet (ENET-1)
Function
Function
Function
Page 31 of 39
Advertisement
Table of Contents
