System Management - WinSystems SYS-405 Series User Manual

SYS-405 User Manual
2.4

System Management

Name
System
Management
[J4]
6
2014-07-21
SYSTEM MANAGEMENT
Layout Additional Information
J4 supports many system features. The primary uses are to provide a security feature to
manage system intrusion and provide notification on thermal status. Pin 2 (LID#) signifies
whether the system is on/off or opened/closed and can be used for an intruder alert. If this
particular bit is set, the user can wire it to their system to initiate a system shut down. Pin 4
provides thermal trip status, action (e.g., system shut down) is taken in response to the
system overheating, and the user can be notified of a thermal trip. More information
regarding thermal protection signaling is provided in the table below. Additionally, you can tie
J4 to a sleep mode via Pin 3.
Connector MFR/Part Number
Reference
PCB Connector Molex/87832-2020
Mating Connector Molex/51110-2050
Crimp Connector Molex/50394-8051
WinSystems Part
Number
G650-2020-0H0
N/A
N/A
Page 13 of 39