Table of Contents
Advertisement
SYS-405 User Manual
5.2.1
Advanced Menu Items and Submenus
Item/Submenu
CPU Configuration
Active Processor Cores
Execute Disable Bit
Limit CPUI Maximum
Bi-directional PROCHOT#
VTX-2
TM1
DTS
CPU Power Management: This subset of the CPU Configuration Submenu provides options for CPU power management
Intel ®SpeedStep ™
Boot Performance Mode
R
Intel
Turbo Boost
Technology
C-States
Uncore Configuration
GOP Driver
IGD Configuration
Integrated Graphics Device
Primary Display
RC6 (Render Standby)
PAVC
GTT Size
Aperture Size
DVMT Pre-Allocated
IGD Turbo
Spread Spectrum Clock
Force Lid Status
BIA
IGD Boot Type
Panel Scaling
LCD Panel Type
Bpp Select
South Cluster Configuration
PCI Express Configuration: This subset of the South Cluster Configuration submenu provides options for PCI Express configuration
PCIe 0 Speed
PCIe 1 Speed
PCIe 2 Speed
PCIe 3 Speed
PCI Express Root Port 1
PCI Express Root Port 2
2014-07-21
ADVANCED MENU ITEMS & SUBMENUS
Default
Setting
[All]
Number of cores to enable in each processor package.
Prevents certain classes of malicious buffer overflow attacks when combined
[Enable]
with a supporting Operating System (OS).
[Disable]
Disabled for Windows XP.
When a processor thermal sensor trips (either core), the PROCHOT# will be
[Enable]
driven. If bi-direction is enabled, external agents can drive PROCHOT# to throttle
the processor.
[Enable]
Enables or disables the VTX-2 Mode support.
[Enable]
Enables or disables TM1, which is a thermal monitor based on clock throttling.
Enables or disables the digital thermal sensor, which protects the sensor from
[Enable]
overheating.
[Enable]
Enables or disables processor performance states (P-States)
[Max Performance]
Selects the performance state that the BIOS will set before OS handoff.
Enable to allow processor cores to run faster than the base operating frequency
[Enable]
if it is operating below power, current, and temperature specification limits.
[Disable]
Enables or disables C-States
Enable or disable the GOP Driver. Enabling will unload VBIOS; Disabling will load
[Enable]
VBIOS.
[Enable]
Enables or disables the Integrated Graphics Device (IGD).
Selects which of the IGD/PCI Graphics devices should be the primary display, or
[Auto]
select SG for Switchable/Hybrid GFX.
[Enable]
Enables or disables render standby support.
[Lite Mode]
Enables or disables protected audio/video control.
[2MB]
Selects the GTT size.
[256 MB]
Selects the aperture size.
Selects the DVMT 5.0 pre-allocated (Fixed) graphics memory size used by the
[64 MB]
internal graphics device.
Selects the IGD Turbo feature, if Auto is selected. IGD Turbo will only be enabled
[Auto]
when SOC stepping is 80 or above.
[Disable]
Enables the clock chip spread spectrum feature.
[ON]
For test: forces lid status to on or off.
>>Auto: GMCH Use VBIOS Default
[Auto]
Selected Aggressiveness Level.
Selects preference for Integrated Graphics Device (IGD) display interface used
[eDP]
upon system boot up.
[Auto]
Select the LCD panel scaling option used by the internal graphics device.
[1024 x 768 NXP
Select LCD Panel Type
Generic]
[24 Bpp]
Select Bpp Type
[Auto]
Configures PCIe 0 speed.
[Auto]
Configures PCIe 1 speed.
[Auto]
Configures PCIe 2 speed.
[Auto]
Configures PCIe 3 speed.
[Enable]
Controls the PCI Express Root Port 1 (MiniPCIe)
[Enable]
Controls the PCI Express Root Port 2 (MiniPCIe)
Function
>>Level n: Enabled with
Page 27 of 39
Advertisement
Table of Contents
