SYS-405 User Manual
Name
Ethernet GPIO
Reference Voltage
Selection
[JP8]
Ethernet LEDs
6
2014-07-21
Layout
The table below provides jumpers for voltage settings on JP8. The board supports voltages of 3.3V, 5V,
and 12V.
PCB Connector
Jumper
Jumper Kit, 2MM
ETHERNET
Additional Information
WARNING! Jumpering more than one set of pins at a time will damage the board.
Connector Reference
MFR/Part Number
Samtec/TMM-104-01-G-D-SM-
P-TR
Samtec/25N-BK-G
N/A
On-board Ethernet activity LEDs are built into the ENET connectors at
J11 & J13. There is one green LED (left) and one bi-color green/yellow
LED (right). Activity signals for these lights are defined in the table
below.
WinSystems Part Number
G650-2008-0G0
G201-0002-005
KIT-JMP-G-200
Page 16 of 39