WinSystems SYS-405 Series User Manual page 13

SYS‐405 User Manual
Name Layout
Backlight
Power
[JP7]
Panel
Orientation
[JP6]
6
2014‐07‐22
VIDEO
Use the layout graphic on the left and/or the configuration table below to select the appropriate jumper for backlight
power and backlight enable at JP7.
WARNING! JP7 supports one jumper for backlight enable settings and one jumper for backlight power
settings (two total). However, jumpering more than one set of pins (for backlight enable) and one set of pins
(for backlight power) will damage the board.
Connector Reference
PCB Connector Samtec/TMM‐104‐01‐G‐D‐SM‐P‐TR
Jumper Samtec/25N‐BK‐G
Jumper Kit, 2MM N/A
Use the layout graphic on the left and/or the configuration table below to select the appropriate jumper for panel
orientation.
WARNING! JP6 supports one jumper for horizontal panel orientation and one jumper for vertical panel
orientation (two total). However, jumpering more than one set of pins (for vertical) and one set of pins (for
horizontal) will damage the board.
Connector Reference
PCB Connector Samtec/TMM‐104‐01‐G‐D‐SM‐P‐TR
Jumper Samtec/25N‐BK‐G
Jumper Kit, 2MM N/A
Additional Information
MFR/Part Number WinSystems Part Number
G650‐2008‐0G0
G201‐0002‐005
KIT‐JMP‐G‐200
MFR/Part Number WinSystems Part Number
G650‐2008‐0G0
G201‐0002‐005
KIT‐JMP‐G‐200
Page 11 of 39