Table of Contents
Advertisement
SYS-405 User Manual
5.1.1
Main Menu Items and Submenus
The Main menu contains the following items and/or submenus.
Item /
Submenu
System Date
N/A
System Time
N/A
System Information (Read Only)
BIOS Version
CC405yymmdd
BIOS Build Date
mm/dd/yyyy
EC Version
ymmddTXX
EC Build Date
mm/dd/yyyy
(R)
Processor Type
Intel
System
1066 MHz or 1333 MHz
Memory Speed
L2 Cache RAM
512 KB per Core
Total Memory
Up to 8192 MB
[1]
SODIMM Information
MAC Address
00:90:FB:XX:XX:XX
(Module)
MAC Address
00:01:45:XX:XX:XX
(Carrier)
Boot Features
NumLock
[On}
Timeout
[ 2]
CSM Support
[Yes]
Quick Boot
[Disable]
Diagnostic
[Disable]
Splash Screen
Diagnostic
Summary
[Disable]
Screen
BIOS Level USB
[Enable]
Console
[Disable]
Redirection
Allow Hotkey in
[Enable]
S4 resume
UEFI Boot
[Enable]
Legacy Boot
[Enable]
Boot in Legacy
[Disable]
Video Mode
2014-07-21
MAIN MENU ITEMS & SUBMENUS
Default Setting / Value
Displays the current date in MM/DD/YYYY format. To set or change the date, highlight the row using the
up/down arrow keys, then highlight the month, day, or year by pressing the Enter key until the desired
value is highlighted with a square block (
Displays the current time in HH/MM/SS format. To set or change the time, highlight the row using the
up/down arrow keys, then highlight the hour, minute, or second by pressing the Enter key until the
desired value is highlighted with a square block (
Atom™ CPU E3800 series
Function / Definition
). Use the +/- keys to change the highlighted value.
). Use the +/- keys to change the highlighted value.
BIOS Version
BIOS Build Date
EC Version
EC Build Date
Processor Type
System Memory Speed
L2 Cache RAM
Total Memory
MAC Address (Module)
MAC Address (Carrier)
Selects the default state for NumLock during power up
Number of seconds that Power On Self Test (POST) will wait for
user input before booting
Compatibility Support Module that provides backward
compatibility services for legacy BIOS devices, such as
int10/int13, dependent OS.
Enables/disables quick boot
Enables/disables the diagnostic splash screen during boot.
Displays the Diagnostic Summary screen during boot.
Enables/disables all BIOS support for the USB to reduce boot
time. Note: This will prevent using a USB keyboard in Setup or a
USB biometric scanner such as a finger print reader to control
access to setup, but does not prevent the operating system
from supporting such hardware.
Enables/Disables Universal Console Redirection
Enables or disables hotkey detection when the system resumes
from the Hibernate state.
Enables the Unified Extensible Firmware Interface (UEFI). The
UEFI interfaces between the OS and firmware.
Enables Legacy boot (USB floppy emulation)
Enable forces display adapter to switch from video mode to
Text Mode 3 at the end of BIOS POST for non-UEFI boot mode
(legacy boot). Some legacy software, such as DUET, requires
BIOS to enter text video mode on boot.
Page 25 of 39
Advertisement
Table of Contents
