Table of Contents
Advertisement
30
EN
Regula r Timer
Progra mm ing
Remember, the clock must be set before you can
programme the timer (
Before performing the following steps:
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Turn on the TV and select the VIDEO channel (or AV mode).
● Set the
PAL/ M ESECAM switch to the appropriate position.
pg. 16
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
START+/ –
PRO G/ M EN U
When Using The Illumi-Guide Feature
● Buttons light or blink on the remote control for
approximately 10 seconds. If the button or buttons extinguish
during timer programming, press ILLUMI GUIDE and the
button or buttons previously lit or blinking come back on. If
the button or buttons do not re-light or start blinking again,
press M EN U and re-perform the timer programming
procedure from the beginning.
● If for some reason the remote control's signal is not received
by the video recorder, press M EN U and re-perform the timer
programming procedure from the beginning.
Downloaded from:
https://www.usersmanualguide.com/
pg. 55).
7
8
9
0
4
TV/ SAT/ VCR
ILLU M I GU ID E
TIM ER RECO RD IN G(cont.)
If you don't know the S
you wish to record, use the following procedure to set your
recorder to timer-record the programme. Or you can use the
Illumi-Guide feature, where the remote control tells you which
button to press next by lighting it up. To use the Illumi-Guide
feature, with the TV/ SAT/ VCR switch set to "VCR", press
ILLU M I GU ID E before performing step 1 . ( PRO G , REW , PLAY ,
FF light up at this time.)
If you aren't going to use the Illumi-Guide feature, go directly to
step 1 .
ACCESS TIMER
PRO GRAMMIN G SCREEN
Press PRO G .
1
● If you are using the Illumi-Guide feature, the following
buttons will light up: N U M BER keys (0–9), START +/ – ,
STO P +/ – , D ATE +/ – , TV PRO G +/ – , M EN U and
CAN CEL .
ACCESS PRO GRAMME SCREEN
Press START +/ – . (If you're
2
just starting out, " P1"
appears.)
8
The front display panel looks like this:
● If you are using the Illumi-Guide feature, the following
buttons will light up: START +/ – , STO P +/ – , D ATE +/ – ,
TV PRO G +/ – and M EN U .
EN TER PRO GRAMME ST ART TIME
Press START +/ – to enter
3
the time you want
recording to start.
● Press and hold
+/ – to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
The front display panel looks like this:
● If you are using the Illumi-Guide feature, the following
buttons remain lit: START +/ – , STO P +/ – , D ATE +/ – ,
TV PRO G +/ – and M EN U .
EN TER PRO GRAMME STO P TIME
4
Press STO P +/ – to enter the time you want recording to
stop.
● If you are using the Illumi-Guide feature, the following
buttons remain lit: START +/ – , STO P +/ – , D ATE +/ – ,
TV PRO G +/ – and M EN U .
V
number for the programme
HOW
IEW
– P1 –
START
–:– –
=
SP
DATE
25. 12
[+/–] =
[MENU] : EXIT
SP
– P1 –
START
21:00
=
START
SP
DATE
25. 12
[+/–] =
[MENU] : EXIT
SP
STOP
–:– –
ON
TV PROG
– –
STOP
–:– –
ON
TV PROG
– –
Advertisement
Table of Contents
