Detailed Settings Window - Panasonic PT-F200 Network Manual

Using WebBrowser

Detailed settings window

You can make detail network settings on projector, when connecting without the administrator authority or when connecting
through an access point (infrastructure mode).
LAN settings
1
Click [Detailed set up] in the menu.
Select the items to change and click
2
[NEXT].
The settings window appears, showing the current settings.
• To change the LAN settings, click [CHANGE].
• To return to the previous window, click [BACK].
Settings in this page are the same when setting [USER 1] -
[USER 3] from network menu of the projector. (See page 54)
Complete the detailed settings and click
3
[NEXT].
When [NEXT] is clicked, the next page appears, enabling you
to complete the detailed settings as desired.
After all required items have been entered, a confirmation
window appears.
Click [SUBMIT].
4
The settings will be registered.
Making the above settings effective
Select [WIRELESS LAN] in the network menu of the projector, and use the [
page.
Important video/audio data is protected because AES
even if [ENCRYPTION] is set to [NONE].
※ "Glossary" (See page 71)
(cont.)
※ encryption processing takes place in advance for all network numbers,
64
] buttons to select the network set in this