Table of Contents
Advertisement
Using WebBrowser
Detailed settings window
You can make detail network settings for the projector, when connecting without [Admin (administrator)] authority or when
connecting through an access point (infrastructure mode).
LAN settings
1
Click [Detailed set up] in the menu.
Select the items to change and click
2
[NEXT].
The settings window appears, showing the current settings.
• To change the LAN settings, click [CHANGE].
• To return to the previous window, click [BACK].
Settings in this page are the same when setting [USER 1] -
[USER 3] from network menu of the projector. (See page 29)
Complete the detailed settings and click
3
[NEXT].
When [NEXT] is clicked, the next page appears, enabling you
to complete the detailed settings as desired.
After all required items have been entered, a confirmation
window appears.
Click [SUBMIT].
4
The settings will be registered.
Making the above settings effective
Select [WIRELESS LAN] in the network menu of the projector, and use the [
page.
Important video/audio data is protected because AES
even if [ENCRYPTION] is set to [NONE].
※ "Glossary" (See page 45)
(cont.)
※
encryption processing takes place in advance for all network numbers,
39
] buttons to select the network set in this
Advertisement
Table of Contents
