4-Screen Multi Style - Panasonic PT-F200 Network Manual

Various projection methods

4-screen multi style

Connect up to four computers to one projector, and then divide the projector screen into four parts, and simultaneously display
the screens for the four computers on the projector screen.
Press the [MULTI-LIVE] button on the remote control to turn the projection screen
1
into a full screen display (the status when no index window is displayed).
(See page 36)
If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the projection screen, the
screen will switch over to a full screen display.
Check the status indication on the launcher to make sure that transmission is
2
possible (check that the green lamp is lit).
3
Click [ ] on the launcher.
The window shown to the right appears.
Select and click the projection position.
4
The computer image is transmitted to the selected quarter of the projection screen.
• In the 4-screen multi style, the computer screens from all the computers connected to the projector can be transmitted to the
projector. (If an image from another computer has been sent to the image position where an image is already displayed, the
existing image is replaced by the new image.)
• Picture quality or other options can be set on the <Option> window by clicking [
• If the connection error occurs during projection, the message [Stop "Live mode"] will appear, then restart projection by clicking
launcher buttons.
(cont.)
Switching to a different position
Select and click a different projection position in step 4 above.
Enlarged display
If [ ] is clicked with a computer, projector screens temporarily change to full screen display.
To return to the original display, click [
projection positions with each computer.
Quitting 4-screen multi style
Select and click the checked position in step 4 above.
] with the computer that click [
] on the launcher.
37
] and select original