Various projection methods
Multiple Source Multi Live Mode
Connect up to four computers to each of up to eight projectors, and project in each projector by the 4-screen multi style.
Press the [MULTI-LIVE] button on the remote control to turn
1
the projection screen into a full screen display (the status
when no index window is displayed).
If you press the [MULTI-LIVE] button once or twice when index windows are
displayed on the projection screen, the screen will switch over to a full screen display.
2
Click [
] of the launcher.
The <Select Access Port> window appears.
3
Click [
] of [Access Device].
4
Select the network number of the desired projectors from [Network].
Projectors powered on in the chosen network group are listed.
Select the desired projectors, and click [OK].
5
Selected projectors are displayed in pink.
If click again, selected items are canceled.
If click [OK], the connection with the projectors is established.
Check the status indication on the launcher to make sure that transmission is
6
possible (check that the green lamp is lit).
7
Click [
] on the launcher.
The window shown to the right appears.
(cont.)
43