Using Pjlink™ Protocol; Applicable Commands - Panasonic PT-F200 Network Manual

Using PJLink™ protocol
The projector's network functions conform to PJLink™ Class 1 standards, enabling the following operations from a computer
using the PJLink™ protocol.
• Setting the projector
• Querying the projector status

Applicable commands

The following commands are used to control the projector with the PJLink™ protocol.
Command Control details
POWR Power control
POWR ? Power status query
INPT Input switching
INPT ? Input switching query
AVMT Shutter control
AVMT ? Shutter status query
ERST? Error status query
LAMP ? Lamp status query
INST ? Input switching list query
NAME ? Projector name query
INF1 ? Manufacturer name query
INF2 ? Model name query
INFO ? Query for other information
CLSS ? Class information query
PJLink™ security authentication
The password used for PJLink™ is the same as the password set for WebBrowser control.
When using these commands without authentication, leave the WebBrowser control password unspecified.
PJLink™ is a pending trademark in Japan, the United States and other countries and regions. For details on PJLink™
specifications, refer to the Japan Business Machine and Information System Industries Association website.
The URL is http://pjlink.jbmia.or.jp/english/
The system locks for several minutes if an incorrect password is entered three times in succession.
Parameters
0 = Standby
1 = On
Parameters
0 = Standby 1 = On
2 = Cooling down 3 = Warming up
Parameters
11 = COMPUTER1 12=COMPUTER2
21 = VIDEO 22=S-VIDEO
23 = COMPONENT
51 = NETWORK
Parameters
30 = Shutter mode off (video mute cancelled)
31 = Shutter mode on (video mute)
Parameters
1st byte : Indicates fan errors; a number from 0 to 2
2nd byte : Indicates lamp errors; a number from 0 to 2
3rd byte : Indicates temperature errors; a number from 0 to 2
4th byte : Fixed at 0
5th byte : Indicates filter errors; a number from 0 to 2
6th byte : Indicates other errors; a number from 0 to 2
Numbers from 0 to 2 indicate the following
0 = No error detected
1 = Warning
2 = Error
Parameters
1st number (1–5 digits): Cumulative hours of lamp use
2nd number: 0 = lamp off; 1 = lamp lit
The following values are returned in this parameter
"11 12 21 22 23 51"
Returns the name set in "HOSTNAME
※The "HOSTNAME" is the projector name set in the projector itself.
Returns "Panasonic"
Returns "F200NT"/"FW100NT"
Returns the version number or similar identification
Returns "1"
68
Notes
※ ," in "NETWORK"