Displaying the internal test pattern
The projector has eight types of internal test patterns
to check the condition of the set.
To display test patterns, follow the steps below.
• Results of adjustment on the image,
Note
picture quality, position, size and other
factors will not be reflected in test
patterns. Be sure to display the input
signal before performing various kinds
of setting.
: Search through the various types of test
patterns
Cycle of displayed internal
test patterns
MENU screen
+
Entry screen
Focus
Color bars
Window (inversion)
Black on
white ground
Window
White on
black ground
Setting the security
The projector's security function enables the password
input screen to be displayed or a company's URL
address to be set and displayed underneath the
projected images.
(When using the projector for the first time)
Press the
buttons in this order, and press the ENTER button.
(When the password has been changed)
Input the new password, and press the ENTER button.
All white
All black
Flag
16:9 frame
PASSWORD
OK
RETURN
,
,
,
INPUT PASSWORD
It is possible to display the password input screen
each time the power is turned on. If this option is
used, no operations except for the POWER button
can be performed without inputting the correct
password.
ON : Password input is enabled.
OFF : Password input is disabled.
AMEND PASSWORD
The password can be changed. Press the ENTER
button.
Set the password using the
buttons (up to 8 buttons can be set).
Press the ENTER button.
Confirm the password by inputting it again.
Press the ENTER button.
(This completes the settings.)
Note
• Asterisks (
screen in the place of the actual
password when the password is input.
• If the wrong password is input, the letters
for "Password", "New", etc. appear in red.
Input the correct password.
TEXT DISPLAY
The text which has been set can be displayed
underneath the projected images all the time.
ON : The text display is enabled.
OFF : The text display is disabled.
TEXT CHANGE
The text which is to be displayed when ON has
been selected for the text setting can be changed.
Press the ENTER button.
Select the text using the
and press the ENTER button. (Up to 22
alphanumerics can be input in succession.)
Select "OK" using the
and press the ENTER button.
• To cancel the change at any time, select Cancel.
,
,
,
and
) will appear on the
buttons,
buttons,
37