Adjusting The Picture; Picture Mode; Bright; Contrast - Panasonic DLP PT-D3500U Operating Instructions Manual

Adjusting the picture

• For RGB signals
PICTURE

PICTURE MODE

GRAPHIC

BRIGHT

32

CONTRAST

32

COLOR TEMP.

DEFAULT

WHITE GAIN

50
SHARPNESS 06
NR OFF
AI ON
SYSTEM
RGB
SELECT ADJ RETRN
• For S-Video/Video signals
PICTURE
PICTURE MODE STANDARD
BRIGHT 32
CONTRAST
32

COLOR

32

TINT

32
COLOR TEMP.
DEFAULT
WHITE GAIN 25
SHARPNESS 06
NR OFF
AI
ON
TV-SYSTEM AUTO1
SELECT ADJ RETRN
PICTURE MODE
The picture mode can be selected from the
following depending on viewing conditions and the
video signal source in use:
DYNAMIC : Picture brightness/contrast ratio is
increased to suit brighter viewing
environments.
GRAPHIC : The picture becomes suitable for
input from to the personal
computer.
STANDARD : The picture becomes suitable for
moving images in general.
CINEMA : The picture becomes suitable for
movie sources.
NATURAL : The picture becomes suitable for
use in a dark room.
BRIGHT
"BRIGHT" is used to adjust the black level
(brightness).
: Raises the picture brightness.
: Lowers the picture brightness.
CONTRAST
"CONTRAST" is used to adjust the contrast ratio.
: Raises the contrast ratio.
: Lowers the contrast ratio.
• For DVI signals
PICTURE
PICTURE MODE GRAPHIC
BRIGHT 32
CONTRAST 32
COLOR TEMP. DEFAULT
WHITE GAIN 50
SHARPNESS 06
NR OFF
AI ON
SELECT ADJ RETRN
•For YP P signals
B R
PICTURE
PICTURE MODE STANDARD
BRIGHT 32
CONTRAST
32
COLOR 32
TINT 32
COLOR TEMP.
DEFAULT
WHITE GAIN 25
SHARPNESS 06
NR OFF
AI
ON
SYSTEM AUTO
SELECT ADJ RETRN
COLOR
(For S-Video/Video/YP
B
: Deepens colors.
: Weakens colors.
TINT
(For S-Video/Video/YP
B
"TINT" is used to adjust human skin.
: Adjusts skin tone toward greenish color.
: Adjusts skin tone toward reddish-purple.
COLOR TEMP.
The color temperature is adjusted when the white
areas of images take on a reddish or bluish hue.
DEFAULT: Standard setting
HIGH : The white areas take on a more
bluish-white hue.
MIDDLE : The white areas take on a slightly
reddish hue.
USER : The RGB values of the white balance
are set separately.
Press the ENTER button, select "W-
BAL HIGH" or "W-BAL LOW", and
proceed with the detailed settings.
: The colors of the selected item
are darkened.
: The colors of the selected item
are lightened.
WHITE GAIN
The brightness of white parts of the image can be
adjusted.
: The intensity of white color increases.
: Reverts to natural image.
P signals only)
R
P signals only)
R
29