Fan Control2; Func1; Key Assign; Auto Pow.off - Panasonic DLP PT-D3500U Operating Instructions Manual

OPTION2 settings

FAN CONTROL2

The fan can be controlled in accordance with the
direction in which the images are to be projected.
HORIZ. : Standard setting
VERTICAL : This is selected when projecting
images at a significant angle toward
the vertical (more than 30 degrees
from the horizontal).
3 0 °
H
3 0 °
H: HORIZ.
V: VERTICAL
• Select the correct FAN CONTROL2
Attention
setting in accordance with the direction
in which the images are to be projected.
Using the projector at the wrong FAN
CONTROL2 setting will shorten the
service life of the lamps.

FUNC1

You can set the functions of the FUNC1 button of
the remote control.
LAMP POWER:
ASPECT:
SUB MEMORY LIST: This button has the same
AUDIO:

KEY ASSIGN

You can set the functions of the
the remote control when the menu screen is not
displayed.
NORMAL: You can deactivate the
buttons when the menu screen is
not displayed.
VOLUME: You can adjust the sound volume
using the
menu screen is not displayed.
36
V
3 0 °
H
3 0 °
V
This button has the same
functions as "LAMP
POWER" of "OPTION2."
This button has the same
functions as "ASPECT" of
"POSITION."
functions as "SUB MEMORY
LIST" of "OPTION1."
This button has the same
functions as "AUDIO."
buttons of
buttons when the

AUTO POW.OFF

The projector can be automatically set to the
standby mode if no signals are input for the set
duration.
DISABLE : Standard setting. This function
is set to OFF.
15MIN.–60MIN.: The duration can be set in 5-
minute increments from 15 to
60 minutes.
• The auto power OFF function does not
Note
work while the freeze function is used.

PASSWORD

This function is used when a service person.
Input the password with the numeric buttons (0 to
9) of the remote control and press ENTER button to
confirm the entry.