SATO Argox D2-250 User Manual page 56

4 Configuring Your LAN Printer by Web Setting Tool
When the connection is successful, the Login page will be displayed. Input the user
name and password to log in to the web setting tool. The default user name and the
default password are given below:
Default user name: admin
Default password: admin
The default password can be changed in the "Device Setting \ Change Login
Password" webpage.
This web setting tool can be used to manage multiple label printers in the same local
area network segment under the Windows operating system as long as there is no
conflicting IP address in the network. You can also check each of the MAC addresses
listed in this tool against the MAC address label you can find on each of the printers.
The label printer that is connected through TCP/IP in the way like a directly
connected local printer can be used with a random PC connected in the same local
area network segment. So, through the tool, all commands applicable to the LAN
mode can work on the printer in the same way, as the printer must be configured upon
the TCP/IP communication protocol with the IP address of the printer.
When doing settings through a tablet PC or Smart Phone for the printer working in
infra mode, please set the same network segment of the host terminal to that of the
printer, for example, 192.168.6.XXX (1~254). The Wi-Fi mode for the printer is infra
mode that can be searched by the wireless device manager of the host terminal.
50