Table of Contents
Advertisement
1. Make sure the projector is turned on.
2. Start your web browser on a computer or device connected to the network.
3. Type the projector's IP address into the browser's address box and press the computer's Enter key.
Note: You may need to log in to access some of the options on the Web Control screen. If you see a
log in window, enter your user name and password. (The default user name is EPSONWEB and the
default password is the projector's serial number.)
You see the Epson Web Control screen.
1
Select Basic Control to control the projector remotely.
2
Select OSD Control Pad to change the projector's menu settings.
3
Select Test Pattern to display a test pattern.
4
Select Status Information to view the projector's status.
5
Select Crestron Connected to open the menu.
6
Select Advanced to open the advanced menu screen.
7
Select Remote Camera Access to display the image taken by the optional external camera.
8
Select Lens Control to adjust the lens (focus, zoom, and lens shift).
76
Advertisement
Table of Contents
